UV Ceramic Wheel Coating | Adam's UV Ceramic Wheel Coating | Adam's Polish
- 送料： 1000 yen (nationwide flat rate) / Free shipping for purchases over 6000 yen
- Category: Adams Polish, All Products, Best Sellers, car wash, coating, Wheels and tyres
- Product SKU: SAD220079
- 商品コード： 55003060003-A
SKU: CWC600-01-050
Capacity: 50ml
This is a UV ceramic coating agent with a hardness of 9H for wheels.
Wheels are exposed to harsher conditions than the body, such as brake dust, calcium chloride, brake heat, etc. This product is designed to be thicker and harder when cured than the body product.
We can handle almost any finish, including powder coating, satin finish, clear, and genuine parts.
It is much thicker than UV Ceramic Spray Coating and UV Ceramic Paint Coating .
Use this if you want to install in sections.
We have introduced a new technology called Ceramic Glow Technology, which makes installation even more reliable and easier.
The usage method is almost the same as that of regular coating agents, but it reacts to UV flashlight , also known as black light, so you can be sure to prevent forgetting to apply it.
This product not only has a wonderful luster and deep color, but also has outstanding water repellency.
It can also be used on bodies, glass, headlights, tonneau covers, hoods, plating, plastic parts, and wheels.
The water-repellent effect will last for about six years, but if the water-repellent properties begin to decrease, you can add additional water-repellent properties by applying CS3 or Ceramic Boost , etc., to improve the water-repellent effect and maintain its durability.
The most important factor in the finish of the coating is the preparation of the base. Please make sure to prepare the base.
1. Use Adam's Wheel Cleaner to remove iron particles and clean the wheels.
2. Remove minor scratches with Scratch & Swirl Remover and smooth the surface with a Clay Bar .
3. Use Surface Prep to degrease.
4. Spread the paint all over the surface using a Coating Applicator etc.
5. Use a UV Flashlight to check for any missed spots.
6. Leave it for about 1 to 2 minutes, then gently wipe it with a towel to spread it out.When it becomes sticky and begins to harden, wipe it off to make the surface completely even.
7. Apply the product to the entire surface, making sure to wipe off any areas and ensure there are no uneven spots.
8. Fully hardens in 24 hours.
*Be careful of rain and water while curing.
SKU: CWC600-01-050
Capacity: 50ml
This is a UV ceramic coating agent with a hardness of 9H for wheels.
Wheels are exposed to harsher conditions than the body, such as brake dust, calcium chloride, brake heat, etc. This product is designed to be thicker and harder when cured than the body product.
We can handle almost any finish, including powder coating, satin finish, clear, and genuine parts.
It is much thicker than UV Ceramic Spray Coating and UV Ceramic Paint Coating .
Use this if you want to install in sections.
We have introduced a new technology called Ceramic Glow Technology, which makes installation even more reliable and easier.
The usage method is almost the same as that of regular coating agents, but it reacts to UV flashlight , also known as black light, so you can be sure to prevent forgetting to apply it.
This product not only has a wonderful luster and deep color, but also has outstanding water repellency.
It can also be used on bodies, glass, headlights, tonneau covers, hoods, plating, plastic parts, and wheels.
The water-repellent effect will last for about six years, but if the water-repellent properties begin to decrease, you can add additional water-repellent properties by applying CS3 or Ceramic Boost , etc., to improve the water-repellent effect and maintain its durability.
The most important factor in the finish of the coating is the preparation of the base. Please make sure to prepare the base.
1. Use Adam's Wheel Cleaner to remove iron particles and clean the wheels.
2. Remove minor scratches with Scratch & Swirl Remover and smooth the surface with a Clay Bar .
3. Use Surface Prep to degrease.
4. Spread the paint all over the surface using a Coating Applicator etc.
5. Use a UV Flashlight to check for any missed spots.
6. Leave it for about 1 to 2 minutes, then gently wipe it with a towel to spread it out.When it becomes sticky and begins to harden, wipe it off to make the surface completely even.
7. Apply the product to the entire surface, making sure to wipe off any areas and ensure there are no uneven spots.
8. Fully hardens in 24 hours.
*Be careful of rain and water while curing.
Estimated delivery
We will ship within 10 business days from the same day after payment is confirmed or after receiving the delivery request.
- There may be a slight delay depending on the congestion status and inventory status of your order.
- If it takes more than 10 days to ship, we will contact you by email.
- If the delivery time is long, the condition of the product may be considered as shipped due to the system. In that case, we will contact you directly by e-mail to contact you until shipping.
- If you are in a hurry, please check the stock before purchasing.
Precautions for delivery
- Please note that we cannot basically accept the designation of the transportation service because it is managed according to the product and shipping location.
- If you purchase different items at the same time, we may send them separately.
- If you purchase different items at the same time, the shipping method may differ from the one shown.
about shipping cost
Prices vary depending on the packing size of the product. You can check the product price and shipping fee on the shipping method screen by going to the cash register.
■ Free shipping
Items marked as free shipping.
Post mailing and small size delivery are free shipping for purchases of 7,000 yen or more.
■ Post mailing
Shipping:100 yen (nationwide)
Method:Standard mail
Products:Stickers (small/medium), key chains, etc.
Remarks:Free shipping on purchases of 7,000 yen or more
■ Small size delivery
Shipping:300 yen (nationwide)
Method:Non-standard-size mail, letter pack, Yu-mail/Yu-packet products:Stickers (large), apparel, books, etc.
Remarks:Free shipping on purchases of 7,000 yen or more
■ Medium size delivery
Shipping:1,000 yen (nationwide)
Method:Yu-Pack, Sagawa Express products:LED, muffling valve, etc.
■ Large size delivery
Shipping:1,500 yen (nationwide)
Method:Sagawa Express, Seino Transportation Products:Aero, Reinforcement bar, etc.
Large size delivery (individual home not allowed)
Price:2,000 yen (nationwide)
Method:Sagawa Express, Seino Transportation products:Aero, reinforcement bars, products that cannot be used in private homes, etc.
Oversized delivery (individual homes not allowed)
Price:5,000 yen (nationwide)
Method:Sagawa Express, Seino Transportation products:Side steps, products that cannot be used for personal homes, etc.
Special size delivery (individual home not allowed)
Price:7,000 yen (nationwide)
Method:Sagawa Express, Seino Transportation products:bumpers, under panels, products that cannot be used in private homes, etc.
